Get your Black Friday deal here!

British-made · Stainless steel · Self-assembly

Viper Vapour Blasting Machine

Old parts. New life.

Viper stainless steel cabinet

From RSM Aviation, the makers of MiniMAX.

Stainless steel vapour blasting kit for car, motorcycle and engine restoration.

€1,559.99 No UK VAT

€1,775.98 delivered in Europe, No UK VAT.
Standard machine · optional upgrades cost more
Machine pictured with optional heater and wiper

Self-assembly: approximately 6 hours · Allow 10 working days from order

Viper stainless steel self-assembly vapour blasting machine
650 × 650 × 650 mm
working area
Stainless steel cabinetLED light & rinse included12–14 CFM delivered airDirect advice from Max

See the transformation

This is why you want one.

From weathered components to a clean, even finish. These results show our machine range in action; finish varies with the part, media and settings.

Oxidised component before vapour blasting
Before vapour blasting
The same component cleaned by vapour blasting
After vapour blasting

Engine casings. Restoration projects. Your next transformation.

CUSTOMER EXAMPLES

See what our customers are cleaning.

Before-and-after photographs from customers using our machine range.

Customer engine block before and after vapour blasting; original surface finish preserved
Engine Block Tap or click to view full size ↗
Customer metal bracket before and after vapour blasting; original surface finish preserved
Metal Bracket Tap or click to view full size ↗
Customer bullet casing before and after vapour blasting; original surface finish preserved
Bullet Casing Tap or click to view full size ↗

Original customer photographs, with backgrounds removed for consistent presentation. Results vary with the part, media and machine settings.

Purpose-built for wet blasting

Built for your workshop.

A stainless steel cabinet and the essentials to get started, with upgrades to suit the way you work.

See your work — Viper feature
Included

See your work

LED lighting illuminates the work area so you can see the surface as you clean.

Control the finish — Viper feature
Included

Control the finish

Adjust the air pressure to suit your part and the finish you want.

Keep the view clear — Viper feature
Optional upgrade

Keep the view clear

Add the variable-speed screen wiper for adjustable clearing of the viewing glass.

Add built-in heating — Viper feature
Optional upgrade

Add built-in heating

Choose the heater upgrade with digital temperature controls.

See Viper & choose your extras →

Buy direct from RSM Aviation, with personal setup advice from Max.

Know exactly what you’re getting.

Included with Viper

  • Stainless steel cabinet
  • 750W pump and blast gun with 8mm Boron nozzle
  • LED work light and high-pressure rinse system
  • Electrical pack, air solenoid and foot pedal
  • Fasteners, seals, rivets, OB1 sealant and build manual

You’ll need

  • Assembly before use
  • A suitable compressor: 12–14 CFM delivered air with the standard nozzle
  • Water and suitable blast media
  • A standard 13A power supply

Heater and screen wiper are optional extras. Choose the upgrades you want when ordering your Viper.

Your compressor

Match your air supply.

12–14 CFM of delivered air
150–200 litre receiver tank

Recommended for the standard gun and nozzle. More compressor airflow supports faster cleaning when the gun can use the extra air.

Once the gun’s air demand is met, a larger matched nozzle and air jet can use more compressor capacity.

Optional ProMAX nozzle & airjet kit

More cleaning speed. Same air supply.

The ProMAX nozzle and airjet kit is designed to deliver approximately twice the cleaning speed of our standard blast gun using the same compressor airflow.

If single-phase electricity limits your workshop to around 20 CFM, ProMAX helps you get more cleaning performance from that available air supply — without moving to a larger compressor.

An optional upgrade, priced separately from the machine. Cleaning speed varies with the part, contamination, blast media and operating pressure.

Choose ProMAX in your optional upgrades →

Build it. Set it up. Start restoring.

The panels arrive fabricated and ready to assemble: pop-rivet them together, seal the joints, then fit the supplied equipment. Allow approximately 6 hours for the build. Manuals are supplied with your machine.

01

Build the cabinet

Assemble and seal the cabinet and legs using the supplied components and manual.

02

Fit the equipment

Install the supplied pump, blast equipment and controls according to the instructions.

03

Prepare to clean

Add water and media, connect a suitable compressor and power supply, then follow the setup instructions.

Approximately 6 hours to build

An air riveter is recommended for the 4.8 mm stainless steel rivets. No panel bending is required; fasteners, seals, rivets and OB1 sealant are supplied.

Prefer your machine fully assembled?

Skip the build. Choose the VapourMAX 650.

The same 650 × 650 × 650 mm working area, supplied fully assembled with a heater and screen wiper included. Ideal if you’d rather spend your time restoring parts than assembling your machine.

€2,999.99 No UK VAT

Explore the VapourMAX 650 →

Customer feedback

“Very simple to set up and get working.”

★★★★★ · Gary Eastman · Verified owner, VapourMAX 650

Viper and VapourMAX 650 share the same core machine design.

See customer feedback ↗

Viper specifications

Work area650 × 650 × 650 mm (W × D × H)
ConstructionINOX stainless steel
Pump750W submersible
Blast nozzle8mm Boron
Power220V · single 13A socket
Air supply12–14 CFM of delivered air with a 150–200 litre receiver tank (standard gun/nozzle)
Viewing screen4mm toughened glass
Exhaust connectionStandard 68mm pipe
OperationFoot pedal
AssemblyKit · assembly and sealing required
Heater & wiperOptional upgrades

Before you buy.

Compressor requirements

We recommend 12–14 CFM of delivered air with a 150–200 litre receiver tank for the standard gun and nozzle. Airflow determines cleaning speed: more CFM supports faster cleaning when matched to the gun. Once its demand is met, a larger matched nozzle and air jet can use additional compressor capacity.

Do I need mains water or a drain?

No permanent connection is required. The machine uses an integral sump; drain and refresh the water when needed.

What about delivery outside the UK?

Our machines are manufactured in the UK. Qualifying UK-origin machines can be imported into the European Union with zero customs duty under the UK–EU Trade and Cooperation Agreement, provided its rules of origin and import-claim requirements are met.

EU exports are supplied without UK VAT. Local import VAT and any courier customs-clearance fees remain payable. EU machine delivery is €215.99; select your country for the checkout total. Outside the EU, contact us for a delivery and customs quotation.

What support is available?

Speak to Max for selection, setup and replacement parts. 12 Month Machine Warranty.

Make it yours

Buy your Viper.

Choose your machine, add the upgrades you want and order online.

€1,559.99 No UK VAT

€1,775.98 delivered in Europe, No UK VAT.

Buy your Viper now →

Self-assembly kit · Optional upgrades cost more · Allow 10 working days from order

Watch video

Open this video on YouTube ↗

Optional services are off until you choose them. Change or withdraw your consent here at any time. Your choice is remembered for 180 days.

Read the privacy and cookie notice